[UNBOXING] MSI RTX 4090 Suprim Liquid X

[UNBOXING] MSI RTX 4090 Suprim Liquid X

The first Confidentiality Agreement expires at 15:00 this Wednesday, October 5th (non-disclosure agreement) this allows us to reveal photos of this RTX 4090 Suprim Liquid X that we got directly from MSI France. A very special thank you to MSI France, because the only sample Available in France! As you know from NVIDIA’s announcements, the special RTX 4090s will be available from October 12.

The first “Suprim Liquid X”:

If the “Suprim” series is very well known in MSI, for the first time the brand is offering a version with AIO type autonomous liquid cooling system. The combination of this type of cooling with the “Suprim” series should give us a high-performance high-end card.

Therefore, the card will embed a liquid cooling system consisting of: water block It is responsible for keeping the GPU and memory chips cool, as well as a 240mm radiator to dissipate heat. That’s why we’re on an AIO-type liquid loop, that is, pre-installed. You take your copy of the RTX 4090 Suprim Liquid X and install it directly on your PC.

The two fans that equip the radiator are MSI Silent Gale P12 120mm models designed to provide high airflow with little noise pollution. If the temperature is cool enough, they stay at rest. To optimize this cooling, a TORX 5.0 fan cools a heatsink built into the PCB power supply stages. This fan is inserted into the box through an octagonal cavity. encase in brushed aluminium.

The two sides of this octagon benefit from an RGB backlighting feature, also benefiting from the logo placed on it as well as the “Suprim” lettering on the top edge. back plate, Also brushed aluminum. Finally, note that the card has two BIOSes: quiet and the game.


This MSI RTX 4090 Suprim Liquid X takes advantage of NVIDIA’s brand new architecture aka “ADA Lovelace”. This is intended to replace the Ampere architecture of the GeForce RTX 30xx, which was released a little over two years ago.

This flagship model from NVIDIA has an AD102-300 GPU with 16384 CUDA cores. It has 24GB of GDDR6X memory with 1TB/s bandwidth and sees its TDP reach 450 watts. According to NVIDIA, the speed of this RTX 4090 should be 2 to 4 times faster than the RTX 3090 Ti.

Technicial Specifications:

In terms of frequency, the base is announced at 2235 MHz. Increase points…, a little more patience! 24 GB of G-DDR6 memory runs at 1313 MHz (1008 GB/s) on a 384-bit bus.

Our MSI RTX 4090 Suprim Liquid X is a very good product. overclocking factory facing card Founders Edition It’s from NVIDIA, but we’ll talk about it in the full board review. The memory frequency is 1313 MHz.

As power connectors we find the new 16 pin mini connector. provided by MSI bundle An adapter that allows you to connect at least four 8-pin connectors. Finally, the card’s video output has three DisplayPort 1.4 and one HDMI 2.1 ports.

As you can see, we used the adapter included in the scope of delivery. bundle and which should be powered by 4 PCI-e cables. Looking forward to the CORSAIR 12VHPWR 600W cable to connect it with our Corsair HX1500i power supply. See you on October 12 to explore the performance of this MSI RTX 4090.

Leave a Comment

Your email address will not be published. Required fields are marked *